'Loading' Christmas Card
첨부 '7' |
---|
This is a cool and festive "Retro Loading Screen" christmas card. It features 8-bit clip art and a retro computer font. This a perfect Christmas card for any techie.
Step 1: Supplies
Here is a list of what you will need:
Packing tape
Black tape
X-ACTO knife
Scissors
Stiff white paper
A printer
OPTIONAL: Adhesive roller
Step 2: Printing and Cutting
First you will need to load your stiff paper into your printer. Once that is done, you will need to print the 3-page-PDF in this step AFTER SCALING IT DOWN TO 75%. It is VERY IMPORTANT that you do this. Most computers/laptops have a percentage scale in their print window. BE SURE THE SCALE IS SET TO 75%. After the 3 pages have printed, you will take the first one and an X-ACTO knife and begin cutting out the white rectangles in the middle of the card.
Step 3: More Cutting
Next, you will cut around the card's border; cutting the card out. (You don't need the X-ACTO knife for this.) Be sure to cut out the little white square on the right. Then, on a blank sheet of paper you will trace the part of the card you just cut out. (It does not matter if you trace the square indent on the right or not. Either way you will eventually have to cut out a little square there anyway.) Now simply cut out the shape you made with your pencil. It should be the same size as the part of the card you printed.
Step 4: Assembling the Card
Now what you need to do is cut the green rectangle out of the paper it was in. Once you have the green rectangle you can use the adhesive roller (or a glue stick or regular tape) to stick it on the piece you cut out from the last step. It should be a little bit above the bottom of the paper. Look at the picture for a more accurate placement of the green rectangle.
To combine the two pieces (the one that says "loading" and the one with the green bar), you will need to first place them directly on top of each other (the "loading" one should be on top). Next, you will put a strand of tape one one edge of the card leaving half to hang off, then fold the half that is hanging off to the back of the card. Basically what you are doing is sticking them together from the outside. Do this to all of the edges except the right edge.
Step 5: Finishing
[출처] http://www.instructables.com/id/Loading-Christmas-Card/
번호 | 분류 | 제목 | 글쓴이 | 날짜 | 조회 수 |
---|---|---|---|---|---|
887 | FreeTalk | 크롬 브라우저에서 원격으롤 게임을.. | hooni | 2013.06.10 | 9438 |
886 | FreeTalk | 나중에 퍼 올 소스코드.. | hooni | 2013.06.10 | 0 |
885 | FreeTalk | 즐겨찾기 옛날꺼.. 링크.. | hooni | 2013.06.21 | 0 |
884 | FreeTalk | 능력을 감추고 바보인척 하기는 힘들다. | hooni | 2013.07.10 | 7395 |
883 | FreeTalk | 소리로 분별하는 자동차 고장증상 | hooni | 2013.07.11 | 30628 |
882 | FreeTalk | 하루살이와 메뚜기 | hooni | 2013.07.18 | 10050 |
881 | FreeTalk | 늙은 쥐의 지혜 | hooni | 2013.07.27 | 9160 |
880 | FreeTalk | 가장 작고 가벼운 짐 | hooni | 2013.07.27 | 7570 |
879 | FreeTalk | 위치추적 관련.. | hooni | 2013.08.01 | 0 |
878 | FreeTalk | 읽어보기 ㅎㅎ | hooni | 2013.08.05 | 0 |
877 | News | 코코아 프레임워크 강의 올림.. | hooni | 2013.08.11 | 5263 |
876 | FreeTalk | [펌] 높은 연봉의 프로그래머와 스타트업 | hooni | 2013.08.12 | 7079 |